A Father's Day DIY Gift Idea
With Father's Day mere days away, have you prepared any surprise for your father or other male elders you respect? Since outdoor activity is still a luxury during the crunch of pandemic, celebrating with your family at home is the only available choice. We wish that our special Father's Day edition could bring you some inspiration for memory-making with dads.
Hands down, the best gift you could give your Dad for a Father's Day is quality family time, complete with a few Father's Day activities. But if you want to go the extra mile for Dad, there's nothing better than a handmade craft. I'm sure your dad would love it! And there's nothing that brings more joy to your dad than receiving a useful hand-made gift from his children.
Imagine a little gather up in the living room after a hearty festival meal. Everyone is relaxed and you open a bottle of beer to heat up the atmosphere. But then a question arise: where to put the beer bottle and glasses without worrying about the spill-over? Now it is the right time to give your father the problem-solver: a wooden couch sleeve!
How To Make The Wooden Sofa Sleeve?
- Ruler & Pencil
- 198 Pcs Tool Kit (or 168 Pcs Tool Kit)
- DKBL20DU3 Brushless Drill (with different bits)
- DKRT02 Mini Grinder
- A Hole Saw Bit (a hole cutter)
- Wood Panels
- Anti-corrosive Paint
Get 15% OFF on First Three Products You Need For This DIY
Coupon Code: Z898ZMT7VAM9
Valid June 14 - 24，2021
DEKO 168 Pcs DIY and Household Repair woodworking Tool Set
DEKO DKBL20DU3 20V Cordless Brushless Drill
DEKO 220V Electric Drill Variable Speed Mini Grinder Rotary Tool Kit Cutting Polishing Drilling with Accessories
DEKO 198 Pcs Home Repair Tool Kit
Please follow the main steps below:
Step 1: Determine the sizes of wood you will need by measuring the armrest of the sofa. Prepare wood panels of three sizes.
Step 2: Measure out the holes for screwdriving and a hole for the cupholder on the top piece of wood. Mark the middle point where the pilot drill of your hole saw will get the hole started.
Step 3: Apply a special bit that works as the hole saw on the brushless drill, then cut.
Step 4: Use the mini grinder to sand the inside of the hole, getting rid of the splinters.
Step 5: Prepare those four holes with the brushless drill for screwdriving.
Step 6: Cut another wood panel and cover it on the holder hole, use a screwdriver, and nail them together.
Step 7: Bind three wood panels together with four screws.
Step 8: Apply a coat of anti-corrosive paint and allow it to dry for at least 12 hours.
Now, show it to your father and enjoy your time together over a glass of beer. Happy Father's Day!